6051 Polyimide Film
Heat-resistance: H Class 180ºC
6051 polyimide film is synthesized by polymerizing PMDA and ODA in strong polar solvents through the process of forming film and imines treatment at high temperature.
It has excellent physical, chemical and electrical properties, atomic radiation resistant, solvent resistant, low & high temperature resistant (as low as -452°F(-269°C) and as high as +500°F(+260°C). Used in flexible printed circuits and as insulating materials of flat electric cables, electromagnetic wires and motors.
Thickness: 0.05mm, 0.075mm, 0.1mm
Width: as cusmomers request
Form: in rolls
Workshop:
Technical Data:
Heat-resistance: H Class 180ºC
6051 polyimide film is synthesized by polymerizing PMDA and ODA in strong polar solvents through the process of forming film and imines treatment at high temperature.
It has excellent physical, chemical and electrical properties, atomic radiation resistant, solvent resistant, low & high temperature resistant (as low as -452°F(-269°C) and as high as +500°F(+260°C). Used in flexible printed circuits and as insulating materials of flat electric cables, electromagnetic wires and motors.
Thickness: 0.05mm, 0.075mm, 0.1mm
Width: as cusmomers request
Form: in rolls
Workshop:
Technical Data:
| Number | Index | Unit | Standard |
| 1 | Density | g/cm3 | ≥1.4 |
| 2 | Tensile Strength | MPa | ≥100 |
| 3 | Breakdown Voltage | KV/mm | ≥30 |
| 4 | Elongation | % | ≥25 |
| 5 | Volume Resistivity | ΩM/CM | 1x107 |
| 6 | Heat shrinkage rate | % | Less than 3.5-2.0 |
| 7 | Dielectric strength | V/UM | ≥100(20+/-5°C) |
| Property Name (Название свойста) | H Type Film (Пленка тип Н) | |||||||||
| Appearance (Наружный вид) | Transparent or semi-transparent golden film with smooth and flat surface and without any needle cavities, bubbles or electrically conductive impurities. (Прозрачная или полупрозрачная золотистая пленка с гладкой ровной поверхностью без проколов, вздутий, электропроводящих включений.) | |||||||||
| Thickness Nominal(um) (Номинальная толщина) | 20.0 | 25.0 | 30.0 | 40.0 | 50.0 | 75.0 | 100.0 | 125.0 | 150.0 | 175.0 |
| Thickness Tolerance(um) (Допуск толщины) | ±3.0 | ±3.0 | ±3.0 | ±4.0 | ±5.0 | ±7.5 | ±10 | ±12.5 | ±15.0 | ±17.5 |
| Width (mm) (Ширина) | 6-1040 | 6-520 | ||||||||
| Length(m) (Длина) | 1000±5 | 500±5 | 300±5 | 200±5 | ||||||
| Tensile Strength MPa ≥ (Прочность на растяжение) | 140 | 120 | ||||||||
| Elongation at Rupture % ≥ (Удлинение при разрыве) | 40 | 60 | ||||||||
| Dielectric Strength MV/m ≥ (Диэлектрическая прочность) | 150 | 120 | ||||||||
| Surface Resistivity Ω.cm ≥ (Поверхностное удельное сопротивление) | 1.0x1013 | |||||||||
| Volume resistivity Ω ≥ (Объемное удельное сопротивление) | 1.0x1015 | |||||||||
| Dielectric Constant (106H) (Диэлектрический коэффициент) | 3~4 | |||||||||
| Dielectric Tangent(106H) ≤ (Диэлектрический тангенс) | 1.0x10-3 | |||||||||